EPC-6200 embedded PC (Arbor)
EPC-6200 embedded PC (Arbor)
Programmable Embedded Controller with Intel® Atom N270 Platform
Features
- ETX CPU Module for scalable and time-efficient customization
- 512KB SRAM built-in for critical data backup
- Rich I/O on the panels with 2 PC/104-Plus expansion slots
- Support wide range DC power input (12 ~ 30V)
- Support DIN Rail & Wall Mounting
- Rugged Design for Shock/Vibration Protection
- Easy Installation/Maintenance
- Fanless design
System
- CPU
- Soldered onboard Intel® Atom N270 1.6GHz CPU with 533MHz FSB
- Memory
- 1 x 200-pin DDR2 SO-DIMM Socket supports 400/533MHz SDRAM up to 2GB
- 1 x 512KB SRAM built-in for emergent data backup
- Chipset
- Intel® 945GSE + ICH7M
- Graphics
- Integrated Intel® GMA950 GFx Core in 945GSE GMCH
- ATA
- 2 x Serial ATA ports at 150MB/s HDD transfer rate
- LAN Chipset
- 1 x Realtek RTL8103EL 10/100Base-T Ethernet controller
- 1 x Realtek 8110SCL Gigabit Ethernet controller
- Watchdog Timer
- 1~255 levels reset
I/O
- Serial Port
- 1 x DB-44 female connector
- Support 2 x RS-232 ports ; 2 x RS-232/422/485 selectable ports
- USB Port
- 4 x USB 2.0 ports
- LAN
- 2 x RJ-45 ports support
- 1 x 10/100Base-T Ethernet
- 1 x Gigabit Ethernet
- Video Port
- 1 x DB-15 female connector for Analog RGB
- Digital I/O
- 1 x 16 Bit programmable Digital Input/Output
- Audio
- Mic-in/Line-out
- Expansion Bus
- 2 x PC/104-Plus slots
Environmental
- Operating Temp.
- -20 ~ 70°C (- 4 ~ 158°F), ambient w/ air flow
- Storage Temp.
- -40 ~ 80°C (-40 ~ 176°F)
- Relative Humidity
- 10 ~ 95% @ 40°C (non-condensing)
- Vibration
- 3 Grms/5~500Hz/random operation
- Shock & Crash
- Operating 20G (11ms), Non-operating 60G with HDD
- Operating 40G (11ms), Non-Operating 80G with CF/SSD Crash 100G (11ms)
Qualification
- Certification
- CE, FCC
Power Requirement
- Power Input
- DC 12V~30V input (w/ 1 x 3-pin DC input terminal block)
- Power Consumption
- 21W (19V@1.1A)
Storage
- Type
- 1 x 2.5" drive bay for HDD/SSD
- 1 x CompactFlash Type II Socket which is outside accessible
Mechanical
- Construction
- Heavy-duty steel housing + Aluminum Heatsink
- Mounting
- Wall-mount/Din rail mounting
- Weight
- 1.7 kg (3.74 lb) (Bare-bone)
- Dimensions
- (W x D x H) 130 x 195 x 85 mm (5.12 x 7.68 x 3.35)
Ordering Information
- EPC-6200
- Barebone system with 1GB DRAM
- WMK-6X00
- Wall mount kit for EPC - 6X00
- PAC-P120W
- 120W AC/DC adapter kit
- SSD-25080
- Intel® 2.5" 80GB SATAII SSD kit
- CBL-6X00-COM
- COM Converter Cable (1 x 44-pin male connector to 4 x DB-9 female + 1 x DB-9 female) L = 200 mm