NPort-W2250A

Moxa 2 port RS-232/422/485 IEEE 802.11a/b/g wireless device servers

  • Geheel vrijblijvend
  • Binnen 1 werkdag
  • Actuele prijzen & levertijden

Bijzondere eigenschappen

Built-in WDT
RTC (real-time clock)
RP-SMA (male)
Omni-directional
Typ. -92 dBm @ 1 Mbps Typ. -84 dBm @ 11 Mbps
Ad-hoc Mode, Infrastructure mode
2.412 to 2.462 GHz (11 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.745 to 5.825 GHz (5 channels)
Typ. -89 dBm @ 6.5 Mbps (20 MHz) Typ. -71 dBm @ 72.2 Mbps (20 MHz) Typ. -85 dBm @ 13.5 Mbps (40 MHz) Typ. -67 dBm @ 150 Mbps (40 MHz)
Up to 100 meters (in open areas)
2.412 to 2.484 GHz (14 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
Typ. -91 dBm @ 6 Mbps Typ. -73 dBm @ 54 Mbps
DSSS OFDM
802.11a/g: 54 Mbps 802.11b: 11 Mbps 802.11n: 6.5 to 150 Mbps
2.412 to 2.472 GHz (13 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
802.11a/b/g/n
16±1.5 dBm @ 1 Mbps 16±1.5 dBm @ 11 Mbps
Typ. -89 dBm @ 6.5 Mbps (20 MHz) Typ. -71 dBm @ 72.2 Mbps (20 MHz)
2.412 to 2.472 GHz (13 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.745 to 5.825 GHz (5 channels)
16±1.5 dBm @ 6 Mbps 14±1.5 dBm @ 54 Mbps
15 dBm @ 1.5 Mbps (6.5 MHz) 12 dBm @ 1.5 Mbps (150 MHz)
Typ. -91 @ 6 Mbps Typ. -74 @ 54 Mbps
WEP encryption (64-bit and 128-bit) WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES) WPA/WPA2-Personal
15±1.5 dBm @ 6 Mbps 14±1.5 dBm @ 54 Mbps
16 dBm @ 1.5 Mbps (6.5 MHz) 12 dBm @ 1.5 Mbps (72.2 MHz)
2 x RS-232/422/485
Links serial and Ethernet devices to an IEEE 802.11a/b/g/n network
Web-based configuration using built-in Ethernet or WLAN
Enhanced surge protection for serial, LAN, and power
Remote configuration with HTTPS, SSH
Secure data access with WEP, WPA, WPA2
Fast roaming for quick automatic switching between access points
Offline port buffering and serial data log
Dual power inputs (1 screw-type power jack, 1 terminal block)

Technische specificaties

Standards IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
10/100BaseT(X) Ports (RJ45 connector) 1
Magnetic Isolation Protection 1.5 kV (built-in)

Time Management NTP Client, SNTP Client
Security HTTPS/SSL, User Authentication Management: local database, RADIUS, Secure Protocols: HTTPS (TLSv1.2), SSH, SNMPv3, Cryptography: HMAC, SHA-1, SHA-256, SHA-384, RSA-1024, AES-128, AES-256
Configuration Options Web Console (HTTP/HTTPS), Windows Utility
Management DHCP Option 82, HTTP, IPv4, SMTP, SNMPv1/v2c/v3, Syslog, Telnet, Web Console
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2/2016/2019 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Linux Real TTY Drivers Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x
Fixed TTY Drivers SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Android API Android 3.1.x and later
MIB Device Settings MIB, RFC1213, RFC1317

Terminator for RS-485 120 ohms
Surge 1 kV
Connector DB9 male
No. of Ports 2
Serial Standards RS-232, RS-422, RS-485
Operation Modes Real COM mode, TCP Server mode, TCP Client mode, UDP mode, RFC2217 mode, Pair Connection mode, Ethernet Modem mode, Disabled
Baudrate 50 bps to 921.6 kbps
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control None, RTS/CTS, XON/XOFF
Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms
RS-485 Data Direction Control ADDC® (automatic data direction control)

Input Current 200 mA @ 12 VDC
Input Voltage 12 to 48 VDC

Physical Characteristics

Dimensions (with ears, without antenna) 77 x 111 x 26 mm (3.03 x 4.37 x 1.02 in)
Antenna Length 109.79 mm (4.32 in)
Dimensions (without ears or antenna) 100 x 111 x 26 mm (3.94 x 4.37 x 1.02 in)
Housing Metal
Weight 557 g (1.23 lb)
Installation Desktop, DIN-rail mounting (with optional kit), Wall mounting

Environmental Limits

Operating Temperature 0 to 55°C (32 to 131°F)
Storage Temperature (package included) -40 to 75°C (-40 to 167°F)
Ambient Relative Humidity 5 to 95% (non-condensing)

Standards and Certifications

Radio Frequency CE (ETSI EN 301 893, ETSI EN 300 328, ETSI EN 301 489-17, ETSI EN 301 489-1), ARIB RCR STD-33, ARIB STD-66
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11

MTBF

Time 363,327 hrs
Standards Telcordia (Bellcore) Standard TR/SR

Maatvoering

Support

Support en ondersteuning
Direct overleg met één van onze specialisten?

Voor technische vragen over onze producten kunt u bij ons terecht, voor of na levering. Onze ervaren technische dienst zal uw vragen vakkundig beantwoorden. U kunt ons bereiken op support@hpsindustrial.nl of telefonisch via 033-2774905. Voor onze verkoop afdeling kunt u mailen naar verkoop@hpsindustrial.nl

Productie

Hoe worden onze producten geassembleerd en uitgeleverd.

Meer lezen

Installatie en software

Van custom made OS images tot klant specifieke software

Meer lezen

Testen

Elk systeem identiek uitgeleverd en grondig getest

Meer lezen

Logistiek

Aflevermogelijkheden vanuit ons magazijn

Meer lezen

Reparatie

Retourzendingen en onze reparatieafdeling

Meer lezen

Technische ondersteuning

Bij problemen staan onze sales en system engineers voor u klaar

Meer lezen

Life cycle

End of Life notificaties en last buy mogelijkheden

Meer lezen

Hulp nodig op advies op maat?

Neem direct contact op met onze engineers.

Neem contact op Bel me terug

Waarom HPS?

3d printer

We beschikken bij HPS over een 3d printer om specifieke onderdelen te kunnen printen en te monteren in het systeem. Denk hierbij bijvoorbeeld aan extra montage beugels voor ventilatoren voor het creëren van extra air flow. Samen met u kunnen we bekijken of er speciale wensen zijn en deze doorvoeren.

Labeling/Serienummerregistratie

We zijn in staat om zelf klant specifieke stickers te ontwerpen die vervolgens op de systemen aangebracht worden voor het gemakkelijk verwerken. Denk daarbij aan het bedrijfslogo, persoonlijke serienummers/QR codes of andere gewenste gegevens.

Bouwbeschrijving

Voor veel van onze klanten waar wij regelmatig systemen voor assembleren hebben wij vaste bouwbeschrijvingen in gebruik, hierin worden alle klant specifieke informatie beschreven.

Nette afwerking bekabeling

Al onze systemen worden met de hand geassembleerd door onze ervaren technici. Er wordt rekening gehouden met de wensen van de klant en de toepassing van het betreffende systeem.

Maatwerk en eigen werkplaats

De kracht van HPS is het leveren van op maat gemaakte systemen en configuraties, geheel naar de wens van de klant.

A-Merk componenten

Onze systemen en producten worden in de meeste uiteenlopende Industriële omgevingen ingezet onder verschillende omstandigheden

Samenstellen, bouwen & configureren

HPS levert systemen voor oplossingen waarbij hoge eisen worden gesteld aan betrouwbaarheid en beschikbaarheid op de lange termijn.